While we do not provide preparation services, here are some instructions and information to ensure your yard is prepared correctly. 

Step 1: Take a Soil Test

Preparation 1The best way to provide the perfect growing environment for turf is to test your soil. Most turf grasses thrive in well-aerated soil with a pH slightly toward the acidic side (between 6 and 7.5). Obtain a soil test kit from your local extension office. To take a soil test, gather soil samples from several places around the area you’ll be sodding. Mix the soil, and place it into a soil testing bag. Expect to pay at least $15 for the test (price varies by region). It takes about two weeks to get results back, and it will take more time to adjust soil as specified by the results. Plan accordingly, and don’t do your soil test the day before sod arrives.

Step 2: Measure the Area You'll Be Sodding

Preparation 2Measure the area you’ll be sodding. Take careful measurements so that you don’t pay for more sod than you need. Order roughly 5 percent extra (over the measured area), so you’ll have enough sod to cut and fit around curves. Purchase sod through a garden center or directly from a sod farm, if there’s one near you. The supplier you purchase from should ask detailed questions about your lawn, including hardiness zone, sunlight vs. shade, how intensely you’ll use the grass and other specifics. These answers determine the types of grasses that will be in your sod. Make sure sod is delivered within 24 hours of being cut. Plan to lay it the day it’s delivered.

Step 3: Dig Organic Matter Into Soil

Use a rototiller to loosen soil to a depth of 6 to 8 inches. Remove any debris you unearth, including rocks. Add and till in 2 to 3 inches of organic matter. Organic matter helps improve soil aeration and water retention and enhances the microbial population in your soil. The bottom line is that organic matter makes your soil healthier. Till in fertilizer or lime based on the results of your soil test.

Step 4: Rake Soil Level

Rake soil level, and ensure that it’s one inch below the grade of sprinkler heads or paved areas, like sidewalks, patios or driveways. Raking evens out the surface and also creates loose soil particles, which are ideal for grass roots to sink into. Soil needs to be moist when you lay sod. Water it well 24 to 48 hours before installation.

*Information taken from https://www.diynetwork.com/how-to/outdoors/gardening/how-to-install-sod